- purge waste
- multi color
- flush volume
Do all 3D printers poop? Which ones do and why
Do all 3D printers poop? No. Which printers purge through a chute, why even in one color, the grams each purge wastes, and what to do with the waste.
Do all 3D printers poop? No. Which printers purge through a chute, why even in one color, the grams each purge wastes, and what to do with the waste.
The multi-color 3D printer with least waste is a tool changer. Waste per color change for switchers, dual nozzles, tool changers and IDEX, worked through.
How to reduce 3D printing cost, lever by lever: infill, walls, layer height, nozzle size, bulk filament, failures and purge, each with a measured saving.
What flushing volume should you use? Bambu Studio and OrcaSlicer values by color pair, black to white and white to black, in mm³ and grams of PLA.
The flushing volume multiplier scales every flush in the slicer's table. Defaults, the 0 to 3 range, grams and dollars saved at 0.8 or 0.7, and how to test it.
The flushing volume from PLA to PETG and back: Bambu Studio's measured 650 mm³, why color-based tables run low, grams per change and how to raise it.
Where multi-color filament waste comes from, a worked cost and time example, the cheaper alternatives, and how to slice and paint a model to cut color changes.