The math behind the print

Longer reads on the questions the calculators raise: what a printer really draws, why parts come out undersized, which layer height and clearance to use, what a print costs and when multi-color is worth the purge.

Newest article

  • power consumption
  • wattage
  • electricity cost

3D printer power consumption compared by model

3D printer power consumption compared: rated maximum watts, measured PLA averages and cost per hour for Bambu Lab, Prusa, Creality, Elegoo and more.

  • pricing
  • print cost

How much do 3D printing services charge?

What 3D printing services charge for a plastic part: online FDM from $1.00, $25 minimum orders, about $95 at Protolabs, and 15 cents a gram at libraries.

  • dimensional accuracy
  • shrinkage
  • flow rate

How to calibrate dimensional accuracy per material

Calibrate dimensional accuracy per material: fix e-steps and flow, print a test part, measure it, and turn the errors into XY, Z and hole compensation values.

  • dimensional accuracy
  • shrinkage
  • moisture

How to print dimensionally accurate nylon parts

Print dimensionally accurate nylon parts: dry the filament, control chamber and cooling, then compensate for print shrinkage and moisture swelling.

  • purge waste
  • multi color
  • flush volume

Do all 3D printers poop? Which ones do and why

Do all 3D printers poop? No. Which printers purge through a chute, why even in one color, the grams each purge wastes, and what to do with the waste.

  • power consumption
  • electricity cost
  • wattage

Ender 3 power consumption: watts, kWh and cost

Ender 3 3D printer power consumption: 80 to 125 W measured on PLA, 270 W or 350 W rated, a 220 or 270 W heated bed, with kWh and cost per print.

  • print cost
  • pricing
  • selling prints

How much does it cost to 3D print a small object?

A small 3D print costs 10 cents to $1 at home in PLA and power. Real model weights and print times, service and library minimums, and how to price small prints.

  • chamber heater
  • ventilation
  • heated bed

What temperature should a 3D printer enclosure be?

Enclosure temperature by filament: 45 °C at most for PLA and TPU, 35 to 50 °C for PETG, 45 to 60 °C for ABS, ASA, PC and nylon, from makers' data sheets.

  • ventilation
  • wattage
  • unit conversion

3D printer exhaust fan: what size and type to use

A 3D printer exhaust fan needs only about 10 to 25 CFM for the heat. Fan types compared by airflow and static pressure, plus DIY wiring, kits and bathroom fans.

  • ventilation
  • unit conversion

3D printer vent hose: diameter and length

A 3D printer vent hose should be 4 inches (100 mm). The duct math behind that size, how long the run can be, and flex hose versus rigid vent pipe.

  • ventilation
  • chamber heater
  • unit conversion

Ender 3 enclosure dimensions: the size that fits

Ender 3 enclosure dimensions: at least 440 × 455 × 465 mm inside, 475 × 470 × 620 mm for the V2, plus Creality's enclosure sizes and volumes in ft³ and m³.

  • chamber heater
  • heated bed
  • wattage

How to heat a 3D printer enclosure

Heat a 3D printer enclosure with the bed at 100 °C and the door shut, or add a thermostat-controlled PTC heater. Watts, heat-up times and DIY safety limits.

  • ventilation
  • power consumption
  • unit conversion

How much ventilation does a 3D printer need?

How much ventilation does a 3D printer need? At least 6 air changes an hour for the room, 96 CFM in a 10 x 12 ft room, or 9 to 23 CFM through an enclosure.

  • ventilation
  • wattage
  • print farm

Inline fan for a 3D printer: what size you need

One 3D printer needs about 9 to 23 CFM of exhaust, and 4-inch inline duct fans are rated 165 to 226 CFM. Fan size, filters, speed and grow tents.

  • ventilation
  • heated bed
  • chamber heater

Enclosure temperature for PLA: how warm is too warm

Keep enclosure air at or below 45 °C (113 °F) for PLA, or the filament softens in the extruder and clogs. When to open the door, and what fan holds 40 °C.

  • ventilation

Can you vent a 3D printer into the attic?

No. The building code sends every exhaust fan's air outdoors, never into an attic, soffit or ridge vent. Where a 3D printer vent can end instead, with clearances.

  • scale
  • unit conversion

What is 1/72 scale? Sizes in inches and mm

1/72 scale means 1 inch on the model is 6 feet in reality. A real foot is 4.23 mm, a meter 13.9 mm, a person 24 mm and a Spitfire 156 mm across.

  • 120v 240v

3D printer voltage switch: 115 V or 230 V?

Set a 3D printer's voltage switch to 115 V in the US and 230 V only on 200 to 240 V mains. Where the switch is, how to check it, and what a wrong setting does.

  • shrinkage
  • dimensional accuracy

ABS vs ASA shrinkage: which one shrinks more

ABS vs ASA shrinkage: about the same. Resin and filament data sheets put both at roughly 0.4 to 0.7%, so start ASA with ABS compensation and measure.

  • shrinkage
  • dimensional accuracy

Does PETG shrink? How much, and compared with PLA

Does PETG shrink? Yes, by under 1%: 0.54 to 0.76% in X and Y and 0.73% in Z in a printed-part study, close to PLA. Plus the value to enter in each slicer.

  • print cost
  • pricing
  • selling prints

How much does it cost to 3D print a dragon?

An articulated 3D printed dragon costs about $0.84 to $2.32 in PLA and power at 27 to 55 cm long. Grams, hours and cost by size, plus how to price one to sell.

  • print cost
  • print time
  • multi color

How much does it cost to 3D print a figure?

What a 3D printed figure or toy costs at home: grams, print hours, filament and electricity for figures from 10 to 60 cm, action figures and fidget toys.

  • print cost
  • print time
  • electricity cost

How much does it cost to 3D print a helmet?

A wearable 3D printed helmet costs about $8 to $33 in PLA and power, a mask $2.50 to $10, and a full suit of armor $200 or more, from real model profiles.

  • pricing
  • selling prints
  • print cost

How much to charge for 3D printed keychains

How much to charge for 3D printed keychains: what one costs to make, a pricing formula, and what you keep at $4, $6 and $8 after Etsy or Square fees.

  • print cost
  • pricing
  • print time

How much does it cost to 3D print LEGO bricks?

A 3D-printed LEGO-compatible 2x4 brick costs about 7 cents in PLA and power, against 21 cents on LEGO's US Pick a Brick. Per brick, per gram and per set.

  • print cost
  • pricing
  • selling prints

How much does it cost to 3D print a miniature?

A 28 to 32 mm miniature costs 10 to 26 cents in resin or PLA. Resin per ml and PLA per gram for real minis, a Warhammer army budget, and what to charge.

  • print cost
  • print time
  • pricing

How much does it cost to 3D print a vase?

What a 3D printed vase costs at home: grams, hours, filament and electricity for vase-mode vases from 13 to 30 cm, solid-wall vases, and what to charge for one.

  • power consumption
  • wattage
  • circuit capacity

How many amps does a 3D printer use?

How many amps does a 3D printer use? About 1 to 3 A at 120 V: 0.7 to 1.7 A while printing, up to 2.9 A at a 350 W peak, plus the outlet and circuit it needs.

  • flush volume
  • multi color
  • purge waste

Flushing volume from PLA to PETG and back

The flushing volume from PLA to PETG and back: Bambu Studio's measured 650 mm³, why color-based tables run low, grams per change and how to raise it.

  • power consumption
  • wattage
  • heated bed

UPS for a 3D printer: size and runtime

Size a 3D printer uninterruptible power supply by watts, not VA, and work out how many minutes its battery holds a print, with Bambu Lab examples.

  • multi color
  • purge waste
  • flush volume

Is multi-color 3D printing worth the filament cost?

Where multi-color filament waste comes from, a worked cost and time example, the cheaper alternatives, and how to slice and paint a model to cut color changes.